P.O. Box 16782 / Seattle, WA 98116 Toll Free 800-201-9300 / Fax 877-349-1922 URE-KOTE PF-60 DESCRIPTION Ten Minute Traffic Ready Pavement Repair URE-KOTE PF-60 is a 10 Minute Traffic Ready pavement repair system that has no odor and is a cold applied polymer. Simply flood water-thin PF-60 into aggregate and wait 10 minutes, then open to traffic. RECOMMENDED USES ✓ Cracks ✓ Spalls ✓ Bridge Deck Overlays ✓ Expansion Joint Header Construction ✓ Control Joint Filler ✓ Freezer Floors www.liquidconcrete.com Copyright 2007 - LiquidConcrete, Incorporated URE-KOTE PF-60 PERFORMANCE DATA Traffic Ready Time 5-20 minutes, depending on ambient Viscosity @ 73°F 80(A)/102(B), similar to olive oil Ratio 1(A):1(B), 2 component Elongation 120% at break, ASTM D-412 Compressive Strength 1580 psi, ASTM C-39 (lower compressive strength combined with high elongation allow PF-60 to withstand heavy abuse. Contact us for details.) Install Temp Range 20°F - 100°F, recommended Coverage 25 sf/gallon @ 64.2 mils 12.5 sf. per gallon @ 128.4 mils Packaging 1 gallon kit 10 gallon kit 30 gallon kit 108 gallon kit (transportation) Shipping Weight 10 lbs/gallon (approximate) Ten Minute Traffic Ready Pavement Repair P.O. Box 16782 / Seattle, WA 98116 Toll Free 800-201-9300 / Fax 877-349-1922 PRODUCT OVERVIEW URE-KOTE PF-60 is an ultra low viscosity, two-part polyurethane hybrid polymer. When flooded into, or combined with, graded aggregates, URE-KOTE PF-60 solidifies to form a tough and durable polymer concrete in less than 10 Minutes. Once in place, PF-60 serves as a high performance and resilient polymer concrete. PF-60 is capable of handling vibration, heavy traffic, and thermal movement by absorbing impact and minimizing its effect on the substrate. TYPICAL USAGE AND APPLICATIONS Simplified application equipment, FASTCAT®, siphons the nearly water-thin liquids (“A” and “B”) from their respective containers through separate hoses and mixes them in a mixing nozzle just prior to application. The mixed liquid is flooded or sprayed over graded aggregates, poured into cracks, or sprayed onto wood, steel or concrete decks, solidifying in one minute. PF-60 creates a resilient, impact resistant, polymer concrete for repairing and sealing spalls, potholes, cracks and expansion joint headers. PF-60 also peforms well as a thin polymer overlay on bridge decks or any surface that requires additional traction. For a demo of PF-60 in your area, please call us at 800-201-9300 or send a note to
This e-mail address is being protected from spambots, you need JavaScript enabled to view it
. RECOMMENDED READING MSDS [Material Safety] Product Data Sheet Available online at www.liquidconcrete.com Recommendations for product use based on tests believed to be reliable. Field conditions vary widely. For this reason, the user must determine product suitability for the particular use and specific applications. LiquidConcrete, Inc. assumes no liability for injury, loss or damage resulting from use of this product. This product is not intended for retail distribution and should only be used by construction professionals experienced in the application and handling of potentially hazardous chemical compounds. www.liquidconcrete.com Copyright 2007 - LiquidConcrete, Incorporated
