P.O. Box 16782 / Seattle, WA 98116 Toll Free 800-201-9300 / Fax 877-349-1922 URE-KOTE R-60 DESCRIPTION Penetrating Crack Sealer/Healer URE-KOTE R-60 is an ultralow viscosity polymer that aggressively seeks out cracks and voids to completely saturate and seal concrete pavements. Within minutes of application, R-60 restores integrity to cracked pavements, preventing further damage from contaminants. RECOMMENDED USES ✓ Cracks ✓ Spalls ✓ Deck Sealer/Crack Healer on PCC Pavement www.liquidconcrete.com Copyright 2007 - LiquidConcrete, Incorporated URE-KOTE R-60 PERFORMANCE DATA Cure Time 2-5 minutes, 100gm test cup Traffic Ready Time 10-20 minutes, depending on ambient Viscosity @ 73°F 12(A)/16(B) Appearance amber(A)/black(B) Ratio 1(A):1(B), 2 component Tensile Strength 4500 psi, ASTM D-412 Compressive Strength 3000 psi, ASTM C-39 Install Temp Range 20°F - 100°F, recommended Coverage 50 – 100 sq.ft. / bridge deck seal 1.5 – 3.2 gal/cf with aggregate Packaging 1 gallon kit 10 gallon kit 30 gallon kit 108 gallon kit (transportation) Shipping Weight 10 lbs/gallon (approximate) Penetrating Crack Sealer/Healer P.O. Box 16782 / Seattle, WA 98116 Toll Free 800-201-9300 / Fax 877-349-1922 PRODUCT OVERVIEW URE-KOTE R-60 is an ultra low viscosity penetrating crack sealer and concrete healer. This unique polyurethane-hybrid restores Portland Cement concrete strength by penetrating deep into concrete pavements and re-bonding cracks. URE-KOTE R-60 seals concrete to stop freeze-thaw spalling as well as protecting from further chemical attack. Traffic Ready in less than 20 minutes. TYPICAL USAGE AND APPLICATIONS Simplified application equipment, FASTCAT®, siphons the nearly water-thin liquids (“A” and “B”) from their respective containers through separate hoses and mixes them in a mixing nozzle just prior to application. The mixed liquid is flooded onto PCC pavement, and poured into cracks on concrete decks, solidifying in 2-5 minutes, and traffic ready in less than 20 minutes. URE-KOTE R-60 may be topped with coarse aggregates prior to cure for added traction. Mixed R-60 cures to a resilient, impact resistant solid plastic, suitable for sealing cracks and repairing spalls on concrete pavement, bridge decks, and concrete floors For a demo of R-60 in your area, please call us at 800-201-9300 or send a note to
This e-mail address is being protected from spambots, you need JavaScript enabled to view it
. RECOMMENDED READING MSDS [Material Safety] Product Data Sheet Available online at www.liquidconcrete.com Recommendations for product use based on tests believed to be reliable. Field conditions vary widely. For this reason, the user must determine product suitability for the particular use and specific applications. LiquidConcrete, Inc. assumes no liability for injury, loss or damage resulting from use of this product. This product is not intended for retail distribution and should only be used by construction professionals experienced in the application and handling of potentially hazardous chemical compounds. www.liquidconcrete.com Copyright 2007 - LiquidConcrete, Incorporated
